Block Party Block #21 - Flying Darts Tutorial

It's the first Block Party Block of 2022. Block Party Block #21 "Flying Darts" reminds me of playing lawn darts on camping trips or in the backyard. The Studio 180 Design Corner Beam®, Tucker Trimmer®, and Corner Pop® tools are used for this block. You can download your block, Here!

This tutorial is about making Popped Half Square Triangles for the Flying Darts Block Party Block.

Start by choosing your fabrics and deciding the size of your block. Then cut your squares out according to your size. See the Tucker Trimmer® tool instructions for how to make half-square triangles. Once you've made your Half Square Triangles, I recommend pressing the seams to open so the unit lays flat and won't bulk up when you put the block together. 

Right Handed Trim

Left Handed Trim

After that, you'll trim your units to size. Trimming must be done before popping the corner so that the unit is as straight as it can be. Place your unit on a cutting mat. Position the Tucker Trimmer over the unit, aligning the diagonal guidelines on the seam for the desired size. Trim the first two edges.

Right Handed Trim

Left Handed

Turn the unit 180 and position the clean-up lines on the unit edges that you trimmed and do the same with the diagonal lines on the seam. Now make the final cuts. 

Now that we've got our units trimmed and square, we want to use our Corner Pop® tool to trim off those dark corners. 

Replacement

Using the tool's cutting chart, we can figure out what the Replacement Triangle Square size needs to be based on the size of the Finished/Cut Away corners. To make your replacement triangles, cut your squares to size, then sub-cut them diagonally. 

Right Handed

Left Handed

Let's find the Cut Away lines size for the replacement triangle. Make sure the Cut Away lines are aligned in the dark corner of the Half Square Triangle. Cut across the diagonal.

Position the newly trimmed half-square triangle and the long diagonal edge of the triangle replacement with right sides together. Stitch in place with a 1/4" seam allowance, then press the seams open.

Right Handed

Left Handed

If you're right-handed, position the newly popped corner in your upper right-hand corner and if you're left-handed, place it in your upper left-hand corner. Lay the Finished Size Corner Trim Down line on the seam of the new corner. Keeping your unit straight is easy if you align it with the grid lines on the tool. Just trim the two sides. Do this for all 12 Half Square Triangles. 

It's really easy to make these units. All you have to do now is make 20 Corner Beams and assemble the block.

Block Assembly

It's best to make all four corners first and press the sections together.

Assembling the middle sections, again press your seams open.

Then stitch all the sections together into rows. Lastly, stitch all the rows together to finish the block. Make sure all seams are open. Have fun.

What to Learn more about the Studio 180 Design tools?

Do you wanna learn how to use these and the other Studio 180 Design tools? My Precision Block Academy will open next week for a short time. Starting next Thursday, the 20th, through midnight on the 23rd you can register for the next set of classes starting February 1st. Using the Studio 180 Design tool and Techniques from the comfort of your own home, you can expand your quilting knowledge. To learn more, check out the Precision Block Academy. I'll write more about the academy next week.