Pages

Sunday, November 15, 2020

Aztec Dance Month 6 and Finishing!

 

Welcome to the final month of the Aztec Dance block of the month. This month we will be making the final block and putting it all together. Thank you to everyone who made this a popular Block of the Month quilt.

You can now purchase Block 6. Remember, you have two options for buying the pattern. First, My website is set up for both Printed and Downloadable PDF versions. For my International customers, I have an Etsy website.

Month 6 

Block 6 is straightforward to make and put together. The center consists of making two different color combinations of half-square triangles and making Dual Colored Diamond in a square units.

Half Square Triangles

Start by using your Quilter's Magic Wand and marking two stitching lines that are 1/4" on either side of the center diagonal on the reverse side tan squares. Layer the blue and tans squares together with the right sides together and stitch.


Cut down the middle between the stitching lines. Pressing toward the dark fabric.

Right Handed
Left Handed

Position the Tucker Trimmer® over the unit, carefully aligning the common diagonal with the stitching seam and the appropriate size of the unit you are making. Trim the first two sides.

Right Handed

Left Handed

Rotate the unit 180°, line up the Tucker Trimmer®, and trim the two sides to measure the size of the unit you are making.


Continue to make all the units.

Dual Colored Diamond in a Square


Position the Center Square Section of the Square Squared® tool on the size according to your pattern instructions.  Place the tool on the trimmed edge of the strip, lining up the corner of the strip with the center mark according to your pattern instructions. Cut up and across the top of the strip to get a precise unit.


Cut the Blue and Tan squares into triangles. Position the Tan and Blue triangle on opposite sides of the center square.  Stitch with the triangles on the bottom with a 1/4" seam allowance. Pressing away from the center.


Position the remaining Blue and Tan triangles on opposite sides of the center square.  Stitch and Pressing seams away from the center.

Right Handed
Left Handed

Position the Trim Down Section of the Square Squared® tool over the unit.  Focus on aligning the "X" marks on the finished size according to your pattern instructions over the sewn seams.  Trim the first two sides.

Right Handed

Left Handed

Rotate the unit.  Reposition the Square Squared® tool lining up the "X"s and then lining up the cleanup lines on the tool with the previously trimmed edges, according to your pattern instructions.


Assembly

Stitch together the squares and half-square triangles units to make up the four patch units for the corners and center of the units.


Layout and Stitch together the units to make your center block.


Your center block is now ready and now you can start putting together your quilt together.


Quilt Assembly


You will start the assembly by making some Flying Geese and Half Square Triangles for the center block borders.  


Once these units are made you will make two top and bottom rows and two side rows.


Stitch the side blocks on the sides of the Center Block and press according to your pattern instructions. Then add the top and bottom rows.


Stitch together (2) Bonus Block 1, and (1) Block 3 together.  Making two center inner rows.


Stitch together (1) Block 5, (1) Bonus Block 2, and (1) Block 1 together.  Making two center outer rows.


Stitch the Center Inner and Outer rows on each side of the Center block. 


Using your pattern instructions assembly the remaining blocks into rows and assemble them to the top and bottom of them the center row.  Add your borders and your quilt is now complete.


Now you can enjoy your beautiful quilt.  Please share your finished quilt by emailing a photo to qa@quiltingaffection.com or on social media, using the @quiltingaffection, and using hashtag #aztecbom.

If you liked this pattern please check out my new book Poppin' With Wings and my other Studio 180 Design companion patterns, by visiting www.quiltingaffecton.com


Tina 

Friday, November 6, 2020

Pre Order My new book: Poppin With Wings

I am really excited and proud to announce my first book Poppin' With Wings. Choose from 8 different quilt designs, take your ordinary flying geese units, and raise them to a whole new level.

Pre-Order Book

Every quilt in the book has been designed around the high precision Studio 180 Design Wing Clipper® I, Corner Pop® II, and Corner Pop® III to bring you 8 stunning projects. Then combined with easy-to-follow project instructions, you can convert the basic flying geese units into some exciting and stunning in the end, plus build your confidence level to a whole new level. 



The book features:

  • 125 Full Colored Pages, including images and cutting charts
  •  Total of 8 projects, 4 using the Corner Pop II and Corner Pop III tools
  •  Companion for the Studio 180 Design Wing Clipper I, Corner Pop II, and Corner Pop III
  •  Easy to follow Step by Step instructions on how to use the Studio I80 Design Tools.
  •  Each project has been thoroughly tested by the author and several Studio 180 Design Certified Instructor.
  • Contemporary to Modern quilts that range from wall-hanging to lap size
  • Right and Left-Handed cutting Instructions

Pre-Order today through November 13th from me directly, and you will receive 20% off your book. Book ships December 1st, just in time for Christmas. 

Don't forget to check to see if you have the tools?  If you need the companion tools, you can order from my website, Studio 180 Designs, or your local Quilt Shop. 

I will be hosting a book launch on my Facebook pages at 7 pm on Friday, November 6th. During the launch, I will highlight the great features of this book, plus give a tour to show you these stunning quilts that are sure to inspire.  So if you're not already following my Facebook page, now is the time. You do not want to miss the exciting launch.