Pages

Thursday, November 14, 2019

Island Batik Ambassador: Top it Off


I finally getting caught up from the preparing and excitement at being at the Houston Quilt Market and Festival. 


My first goal once I was recovered was to get my October Island Batik Project finished for you all to see. And today, I have finally finished it.


October's task was to make a Holiday table topper and have some applique worked into the project.  So after I looked through my Island Batik Fabrics, I decided on a few fabrics that would make my project look have a Christmas feel. 

This project was going to be made from some of my favorite tools, the Studio 180 Design Square Squared Tool, and the Sue Pelland Designs Leaves Galore Template


 I started with making some Little House units for this project.



Next, I needed to cut out some leaves for the center of the Little House units. Next, I prepared my leave fabric by applying MistyFuse Fusible Webbing on the back.  Once the MistyFuse had cooled, I used my Sue Pelland Design Leaves Galore "Norme" Template to cut out 3" Leaves using my 28mm Rotary cutter.  With to passes, I had enough 3" leaves for my project.



Then using a straight ruler, I found the bottom middle and the bottom 1/4" mark. These would be my placement lines for the tips of the leaves.


At the ironing board, I placed the tips of the leaves on the placement lines.  Once the leaves are in proper placement, I fused them to the fabric and stitch them in place.



Next, I need to add some "S" And "Z" shapes using the same Leaves Galore Template. With the MistyFuse down on the cutting mat, I start cutting out the "S" Shapes.  For the "Z" Shapes, I would place the Fused side up.


Now I need to mark some 1/4" placement lines in the corners of a square.  These lines will be used for the placement of the "S" and "Z" Shapes.  


At the Ironing Board, place the shapes tips to match up across two corners and inside the 1/4" marks.  Once in place, fuse the shapes in place and then stitch them in place.


Once I had them everything ready, I put the blocks together and stitched all my table runner together. Then it was time to quilt it. For the quilting, I used my Leaves Galore, and Iron off chalk I some quilting lines and began quilting away.


Here is the finished product, I just love this table runner.  What a fun project and love how piecing and applique can work together. The Sue Pelland Designs Leaves Galore templates to make the cutting so much easier.

Stay tuned for the Novembers Island Batik Ambassador project.

Tina 
"Designs to Inspire"

3 comments:

  1. This is an awesome table topper, Tina! I love what you did with the template and the quilting really sets it off.

    ReplyDelete
  2. Great table topper and I love the Sue Pelland ruler. I love the wavy leaf you made with it, never would have thought of that!

    ReplyDelete